盛源彩票计划群

双组份打胶机发生问题的防备措施

发布时间:2020/09/03    发布人:

在日常运用中,同步带会有许多毛病。为了赶快避免这些毛病,并在毛病发作之前避免它们发作,相关研究人员总结了几种同步带的毛病防备措施。
In daily use, the synchronous belt will have many problems. To avoid these problems quickly and to avoid them before they occur, researchers have summarized several preventive measures for synchronous belt defects.
1、设备时应首要调整预紧力。假如预紧力不够大,同步带的传动才干会大大降低,皮带轮也会急剧升温,磨损附件。相反,假如预紧力太高,同步带的运用寿命将会缩短。因而,正确合理的预紧力是保证同步正常作业的条件。
1, equipment should first adjust the pre tightening force. If the pre-tightening force is not large enough, the transmission ability of the synchronous belt will be greatly reduced, the pulley will also rise rapidly, wearing accessories. Conversely, if the pre tightening force is too high, the service life of the synchronous belt will be shortened. Therefore, correct and reasonable preload is the guarantee for synchronous normal operation.
2、因为同步带的张力跟着作业时间的延伸而改变,操作员需求定时调整同步带的张力。张力的量能够经过张力计丈量,优选每月一次。
2. Because the tension of the synchronous belt changes with the extension of the operation time, the operator needs to adjust the tension of the synchronous belt regularly. The amount of tension can be measured through a tension meter, preferably once a month.
3、滑轮设备精度应得到操控。事实证明,非平行蒙皮同步带轮两边的应力不均匀,边际简单磨损。因而,在设备或替换同步带时,有必要重复调整两个皮带轮,以保证它们平行,并进行试运转。假如货物在传输过程中没有违背,这意味着滑轮组件合格。
3, the accuracy of pulley equipment should be controlled. It has been proved that the stress on the two sides of the non parallel skin belt pulley is uneven and the edges are simply worn. Therefore, it is necessary to re-adjust the two pulleys in order to ensure that the two pulleys are parallel and run in trial when the equipment or the synchronous belt is replaced. If the goods are not violated in the transmission process, this means that the pulley components are qualified.


4、在人性化操作方面,有必要加强和标准操作和办理。制造商应该招聘一些人才,或者在工人上岗前对他们进行一致严格的训练,标准操作人员的操作方法,并加强办理评价。只要这样,才干保证安全生产。
4, in terms of humanized operation, it is necessary to strengthen and standard operation and management. Manufacturers should recruit professionals, or train workers consistently and rigorously before they go to work, standardize the way they operate, and strengthen management and evaluation. Only by doing so can we ensure safety in production.
5 、定时整理和保护设备和设备,查看同步带和同步带轮的运行状况,并及时调整或替换。调查和保护周期一般为15天。
5. Timely arrangement and protection of equipment and equipment, check the running status of synchronous belt and synchronous pulley, and timely adjustment or replacement. The investigation and protection period is usually 15 days.
济南昌盛机械,对双组份打胶机感兴趣的朋友可以关注我们http://www.vwuekjjg.com,敬请期待更多精彩内容)
(Jinan Changsheng Machinery, friends interested in the two-component glue beater can pay attention to our http://www.vwuekjjg.com, please look forward to more exciting content)

万彩会彩票计划群 贵州快3代理 极速赛车是国家的吗 彩票监察计划群 汇丰彩票官网 冠军彩票计划群 北京11选5走势图 极速赛车有规律吗 淘彩票计划群 8828彩票计划群